Blar i Master of Micro and Nano Systems Technology på tittel
Viser treff 21-40 av 57
-
Fabrication and Characterization of SnO2 Junctionless transistor
(Master thesis, 2021)The growing demand for the smallest feature size transistor introduces new challenges such as short channel effects. It becomes difficult to fabricate transistors with the increasing challenge of doping within the nano ... -
Fabrication and Characterization of a Low-Frequency Array for a Hybrid PZT-CMUT Transducer
(Master thesis, 2021)Piezocomposite materials consist of a periodic structure of active piezoelectric materials and passive polymer materials. Piezocomposite material is widely used in medical ultrasound transducers due to the advantages of ... -
Fabrication and Properties of 1-Dimensional TiO2 and ZnO Nanocomposites Prepared by Hydrothermal Method
(Master thesis, 2016)The necessary of renewable energies as the replacement for fossil fuel such as fuel gas from CO2 or hydrogen from photoelectrochemical water splitting process are feasible by using semiconductors as photocatalysts. Among ... -
Fabrication of clogging-free microfluidic chip for continuous separation of microparticles
(Master thesis, 2020)The University of South-Eastern Norway has the plan to integrate a Centre for autonomous Particle Separation, Concentration and Refining (PASECOR) inside the new USN Innovation centre. Through research and innovation, ... -
Fabrication of phantom skin for the biomedical test
(Master thesis, 2021)Implantable biomedical devices (IMDs) have an enormous prospect in the medical sector. A phantom skin model with similar properties to human skin can be fabricated to analyze if the exchange of energy between the IMD and ... -
Feasibility of acoustically engineered backing material for ultrasound transducer : additive manufacturing of tungsten loaded thermoplastic polyurethane (TPU)
(Master thesis, 2023)The present study aims to examine the acoustic characteristics of a metamaterial made from tungsten loaded thermoplastic polyurethane (TPU) using COMSOL simulations. The investigation encompasses the simulation of single ... -
Force/deflection measurements on micromechanical structures
(Master thesis, 2007)Material properties of typical MEMS materials have been widely tested. Properties of MEMS structures also depend on other factors than the material properties. A measurement system has been made to measure force/deflection ... -
High-resolution Fourier Ptychography Microscopy using ultra-violet light and infrared light
(Master thesis, 2023)This thesis focuses on implementing the Fourier Ptychography Microscopy (FPM) technique using Ultra-violet (UV) and infrared (IR) light. In this report, the introduction provides a brief overview of FPM, its history, ... -
Implantable MEMS Electrode for Neuroprosthesis
(Master thesis, 2021)In this thesis, we are microfabricating neural cuff electrodes that will be implanted in the human upper limb and will be utilized for neuroprosthesis. This is a research-based thesis that has been conducted in collaboration ... -
Improved quality factor on lamb wave resonators using a phononic crystal structure array
(Master thesis, 2023)This thesis explores the possibility of increasing the quality factor of a lamb wave resonator device with the use of a phononic crystal structure array on the surface of the bridge suspending the device. In the growing ... -
Interconnected Crosslinked Carbon Nanotubes as Blackbody Emissive and Transmissive Films
(Master thesis, 2024)This study invistagats the applications of interconnected crosslinked carbon nanotubes (iCLCNT) films on silicon substrate to offer efficient infrared (IR) emission as black body behavior for applications such as IR sensors. ... -
Interconnection Technology based on combination of Isotropic Conductive Adhesive filled by Metal-Coated Polymer Spheres with Compliant Ball Greed Array
(Master thesis, 2015)Interconnection technology based on combination of isotropic conductive adhesives (I CA) filled by metal – coated polymer spheres (MPS) with Compliant- Ball Grid Array (C- BGA) has been introduced and discussed as an ... -
Investigating quantization errors and their influence on capability of MEMS products : case study: heavy vehicle TPM (Tyre Pressure Monitoring) sensor
(Master thesis, 2008)The motivation for this thesis has been to clarify the signi_cance of quantization errors in MEMS (Micro Electro-Mechanical System) products and to see how they combine with normal distribution errors. As a case study, an ... -
Investigation of Element Variations in Ultrasound Transducer Arrays by Electrical Impedance Measurements
(Master thesis, 2016)The use of ultrasonic transducer array for medical applications has experienced a revolution in recent years. An ultrasonic transducer array is a transducer that contains a number of individually connected elements. ... -
Investigation of photonic crystal sensors for environmental monitoring applications
(Master thesis, 2024)The thesis is focused on research that can contribute to developing photonic crystal (PC) sensors for environmental monitoring. The thesis is motivated by the need to better understand the impact of human activities on the ... -
Investigations of paper-based lab-on-chips for on-diaper point-of-care screening of urinary tract infections
(Master thesis, 2015)UTIs are common infection diseases in the hospitals, especially in the elderly. Detecting UTIs in the elderly is a difficult and time-consuming procedure. Sampling and detection on a diaper could be the solution. Sampling ... -
Miniature Highly Sensitive Ultrasound Doppler Transducers
(Master thesis, 2017)The ultrasound transducer is considered a critical and important part of any ultrasonic measurement system. The transducer is the part of the system that transmits and receives soundwaves by converting electrical energy ... -
Modeling of QCM for thin layer immobilization in a liquid environment
(Master thesis, 2022)In this thesis, we develop two models of a quartz crystal microbalance (QCM) to analyze the system’s behavior in liquid sensing. These models detail the device response concerning the changes in sensor geometry, surrounding ... -
Molecular biological methods for nucleic acid detection
(Master thesis, 2022)This thesis gives an idea about the Extraction and Amplification of the eDNA/eRNA by three molecular detection method, which is Polymerase Chain Reaction (PCR), Loop-Mediated Isothermal Amplification (LAMP) and Nucleic ... -
Numerical simulation of microplastics trapping in a microfluidic channel utilizing travelling acoustic waves
(Master thesis, 2023)A numerical simulation based on a novel acoustofluidics model with travelling surface acoustic waves has been provided. An acoustic radiation force equation from travelling acoustic waves has been introduced to COMSOL ...