Master of Micro and Nano Systems Technology
Nye registreringer
-
Photocatalytic degradation of biochar modified nano composites
(Master thesis, 2023)Contamination of surface water and groundwater from industrial discharges is a persistent environmental issue. In recent years, the development of solar photochemical approaches utilizing catalysts such as TiO2, ZnO, and ... -
Improved quality factor on lamb wave resonators using a phononic crystal structure array
(Master thesis, 2023)This thesis explores the possibility of increasing the quality factor of a lamb wave resonator device with the use of a phononic crystal structure array on the surface of the bridge suspending the device. In the growing ... -
Doping and etching processes of iCL – CNT for high energy density supercapacitors
(Master thesis, 2023)The purpose of this study is to investigate the defects resulting from the etching and N2 doping process which have the potential to increase the surface area of carbon nanotubes (CNTs), and consequently enhance the energy ... -
Optimized growth of iCL-CNT on a microstructured Al substrate for high energy density supercapacitors
(Master thesis, 2023)This study presents the synthesis of millimeter-tall interconnected cross-linked carbon nanotubes (iCL-CNTs) with high specific capacitance, grown directly on pre-etched Aluminium (Al) substrates. Atmospheric pressure ... -
Optimized Ni Nanoparticle Deposition for iCL-CNT Growth for High Energy Density Supercapacitors
(Master thesis, 2023)This thesis investigates the effect of different sputter deposition parameters on the diameter, morphology, and distribution of nickel nanoparticles, and the consequently synthesized interconnected cross-linked carbon ... -
Optimized Microstructure Al Substrate for iCL-CNT Growth for High Energy Density Supercapacitors
(Master thesis, 2023)The thesis study investigates the effect of Al surface morphology on the growth of inter-connected cross-linked carbon nanotubes for high-energy-density supercapacitors. This study aims to improve the electrochemical ... -
Numerical simulation of microplastics trapping in a microfluidic channel utilizing travelling acoustic waves
(Master thesis, 2023)A numerical simulation based on a novel acoustofluidics model with travelling surface acoustic waves has been provided. An acoustic radiation force equation from travelling acoustic waves has been introduced to COMSOL ... -
Optimized DRIE process for different size membranes fabricated simultaneously
(Master thesis, 2023)The rapid development of wireless communication systems raises the high demand for high Q factor resonators. To fabricate a high Q factor resonator, a precise membrane is important. It requires fabricating different sizes ... -
High-resolution Fourier Ptychography Microscopy using ultra-violet light and infrared light
(Master thesis, 2023)This thesis focuses on implementing the Fourier Ptychography Microscopy (FPM) technique using Ultra-violet (UV) and infrared (IR) light. In this report, the introduction provides a brief overview of FPM, its history, ... -
A Lab-on-a-disc Device for RT-LAMP Amplification of SARS-CoV-2 RNAs
(Master thesis, 2023)This project focuses on developing the amplification part of a user-friendly Lab-on-a-disc device for isothermal nucleic acid amplification testing (NAAT) of pathogens. The device is specifically designed for individuals ... -
Bio-electro chemical process for power to gas application
(Master thesis, 2023)Fossil fuels are non-renewable resources, so their scarcity will increase day by day. Extracting and using fossil fuels also have an impact on the environment. This challenge needs to be solved by developing sustainable ... -
Molecular biological methods for nucleic acid detection
(Master thesis, 2022)This thesis gives an idea about the Extraction and Amplification of the eDNA/eRNA by three molecular detection method, which is Polymerase Chain Reaction (PCR), Loop-Mediated Isothermal Amplification (LAMP) and Nucleic ... -
Modeling of QCM for thin layer immobilization in a liquid environment
(Master thesis, 2022)In this thesis, we develop two models of a quartz crystal microbalance (QCM) to analyze the system’s behavior in liquid sensing. These models detail the device response concerning the changes in sensor geometry, surrounding ... -
Fabrication and Characterization of SnO2 Junctionless transistor
(Master thesis, 2021)The growing demand for the smallest feature size transistor introduces new challenges such as short channel effects. It becomes difficult to fabricate transistors with the increasing challenge of doping within the nano ... -
Red phosphor in Glass
(Master thesis, 2021)Massive electricity demands every year consume a lot of energy. So, consumption of energy has been a topic that is discussed widely due to alarming environmental threats like global warming. Thus, energy-saving technology ... -
Design and Fabrication of on-chip heating for Electric Substitution Radiometer
(Master thesis, 2021)This thesis describes the design, simulations, and fabrication of heating resistors by the photolithography process, and finally integration of a selected resistor through a bonding procedure to the backside of a ... -
Fabrication and Characterization of a Low-Frequency Array for a Hybrid PZT-CMUT Transducer
(Master thesis, 2021)Piezocomposite materials consist of a periodic structure of active piezoelectric materials and passive polymer materials. Piezocomposite material is widely used in medical ultrasound transducers due to the advantages of ... -
Fabrication of phantom skin for the biomedical test
(Master thesis, 2021)Implantable biomedical devices (IMDs) have an enormous prospect in the medical sector. A phantom skin model with similar properties to human skin can be fabricated to analyze if the exchange of energy between the IMD and ... -
Implantable MEMS Electrode for Neuroprosthesis
(Master thesis, 2021)In this thesis, we are microfabricating neural cuff electrodes that will be implanted in the human upper limb and will be utilized for neuroprosthesis. This is a research-based thesis that has been conducted in collaboration ... -
Characterization of Layers with Metal-Coated Polymer Spheres for use in Ultrasound Transducers
(Master thesis, 2021)The properties of materials used in ultrasound transducers affect the properties of the finished transducer, making it important to characterize the acoustic properties of these materials. The study in this thesis is ...
RSS 2.0