Show simple item record

dc.contributor.authorFjeld, Elin
dc.contributor.authorRondeel, Wilhelm G. J.
dc.contributor.authorSønsteby, Gunn Kristin
dc.contributor.authorBekken, Finn Werner
dc.contributor.authorEriksen, Thomas Ranvik
dc.date.accessioned2021-05-27T14:03:15Z
dc.date.available2021-05-27T14:03:15Z
dc.date.created2021-01-27T11:21:26Z
dc.date.issued2020
dc.identifier.citationFjeld, E., Rondeel, W., Sønsteby, G. K., Bekken, F. W., & Eriksen, T. R. (2020, 30 Sept.-7 Oct. 2020). Contact Resistance and Temperature Rise of Cable Connections in Cable Distribution Cabinets. Paper presented at the 2020 IEEE 66th Holm Conference on Electrical Contacts and Intensive Course (HLM).en_US
dc.identifier.issn1062-6808
dc.identifier.urihttps://hdl.handle.net/11250/2756720
dc.description.abstractInitiated by a number of fire accidents in the low voltage switchgear in cable distribution cabinets, investigations have been performed to identify the cause of these fires. The results indicate that the cable connection was likely to be the cause of the problems, rather than overheating of the fuse links accommodated in the fuse switch disconnector modules. In the relevant equipment, the cable is connected with a cable clamp tightened with a specified torque. However, it was found that by mechanically stressing the cable (moving the cable in order to connect another phase), the individual strands of the cable conductor might be displaced and the contact pressure reduced. Based on these findings, laboratory testing have been done, investigating how contact resistance and temperature rise of the cable connection might vary with the practical execution. The results seems to indicate that applying a cable lug connection could be a more reliable solution. Finally, measurement of temperature rise of properly installed cable connections in the field are made by applying miniature wireless sensor elements. The findings show that during a relatively mild Norwegian winter (ambient temperatures between -5-5°C) the temperature rise of the cable connection is far below the relevant temperature limits of such contacts set by the IEC 60439-1.en_US
dc.language.isoengen_US
dc.titleContact Resistance and Temperature Rise of Cable Connections in Cable Distribution Cabinetsen_US
dc.typePeer revieweden_US
dc.typeConference objecten_US
dc.description.versionacceptedVersionen_US
dc.rights.holder© 2020 IEEE.en_US
dc.source.pagenumber110-114en_US
dc.source.volume66en_US
dc.source.journalIEEE Holm Conference on Electrical Contactsen_US
dc.identifier.doihttps://doi.org/10.1109/HLM49214.2020.9307905
dc.identifier.cristin1880212
dc.relation.projectRegionale forskningsfond Oslofjordfondet: 304094en_US
cristin.ispublishedtrue
cristin.fulltextpostprint
cristin.qualitycode1


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record