Blar i Master of Science in Process Technology på tittel
Viser treff 116-135 av 144
-
Simulation of hydrogen tank refueling
(Master thesis, 2021)Several simulations of hydrogen filling process for a type IV tank were completed using openFOAM Computational Fluid Dynamics (CFD) open-source code. CFD codes have been proven to be a useful method for estimating temperature ... -
Simulation of manure resource recovery plant
(Master thesis, 2015-09-18)The Bio Win software was used to simulate manure feeding to a separator, anaerobic digester (AD) and activated sludge (AS) nitrification reactor system. The General Bio Win model called integrated AS/AD model was capable ... -
Simulation of oil production and CO₂
(Master thesis, 2016)Deep geologic injection of supercritical carbon dioxide (CO₂) for enhanced oil recovery (EOR), plays an important role in the sequestration of CO₂ to minimize the impact of CO₂-emissions due to global warming. CO₂-EOR ... -
Simulering av CO2-fjerning med aminer
(Master thesis, 2010-08-26)Gasskraftverk produserer store mengder CO2, og det er ønskelig å unngå utslipp av CO2 til atmosfæren. Skagerak Energi AS har planer om et gasskraftverk med CO2-fjerning i Grenlandsområdet. Det er utført simuleringer ... -
Software Testing, Data Security and GDPR
(Master thesis, 2019)Software and data security are an important part of a modern-day business strategy of any organization as it forms the basis for guaranteed security of information, data, and assets of any organization. This project is ... -
Spredning og antenning av hydrogen - Background Oriented Schlieren (BOS) visualisering
(Master thesis, 2007)Rapporten er delt inn i tre deler. Første del er et litteraturstudie som omhandler tidligere undersøkelser og evalueringer av ”Background Oriented Schlieren”-fotografering (BOS) og hvilke anvendelsesområder den kan ... -
Stochastic flood control using MPC of Kragerø waterways
(Master thesis, 2015-11-06) -
Study of CO₂ storage in oil reservoirs and aquifers
(Master thesis, 2017)Carbon dioxide storage in oil reservoirs and aquifers is one of the most promising research fields regarding reduction of climate gas emissions. Changing of CO₂ physical properties with temperature and pressure in deep ... -
Study on influence of geometrical features on capacity of industrial scale vertical air-lifters
(Master thesis, 2015-10-09)The main aim of this study was to investigate the influence of operating conditions and geometrical features (fluidization air flow rate QFA, transport air flow rate QTA, and nozzle position Z) on mass flow rate of solids ... -
Supported ionic liquids as CO2 adsorbants
(Master thesis, 2008)Denne rapporten er delt inn i to deler, en teori del, og en eksperimentell del. Den teoretiske delen beskriver teori om ioniske væsker og adsorpsjon. Dette er for å få et grunnleggende forståelse av den eksperimentelle ... -
Sustainability analysis and simulation of a Polymer Electrolyte Membrane (PEM) electrolyser for green hydrogen production
(Master thesis, 2023)In recent years, green hydrogen has emerged as one of the energy carriers for the future sustainable development of our society. Due to its non-emission of pollutants during its generation and use, hydrogen is seen as a ... -
Techno-Economic Evaluation of Sewage Sludge Valorization in Kathmandu Valley
(Master thesis, 2024)The Bagmati River, revered as the cradle of the Kathmandu Valley civilization, holds profound cultural and religious significance. The rapid and unregulated urban expansion, coupled with the absence of adequate sewage ... -
Teoretisk analyse av rørstrømning under flytende hydrogenbunkring
(Master thesis, 2022)Denne oppgaven hadde som mål å bruke teoretiske modeller for å estimere trykktapet ved flytende hydrogenbunkring og å studere hydrogenfasen gjennom systemet. Massestrøm studeres også ved å bruke to metoder for kurvetilpasning ... -
The effect of water spray and mist on the hydrogen-air explosion
(Master thesis, 2022)With the world shifting to greener energy, hydrogen has received more traction than any other alternative fuel in the last decade. With it comes the risk of hydrogen-air explosion. The effects of water mist in explosion ... -
The impact of waste heat recovery unit installation on the operation and control of the raw meal department at Norcem Brevik
(Master thesis, 2022)As a step towards net-zero emissions in the future, a CO2 capture facility is under construction at the cement plant Norcem in Brevik. This will reduce emissions by 400 000t/yr. To utilize waste heat from the cement ... -
The Role of Pyrolysis Product Biochar in Advancing Anaerobic Digestion Efficiency
(Master thesis, 2024)Anaerobic digestion (AD) is a renowned technology for the conversion of waste into bio-energy. It can harness energy from the waste and mitigate the impacts related to environmental problems. Despite the high ability of ... -
Thermodynamics and fluid flow models for CO2 flow assurance
(Master thesis, 2023)Carbon capture and storage (CCS) has been widely recognized as a potential method for lowering CO2 emissions. MACON CCS is one of the CCS projects introduced in Norway by SINTEF in 2021. The project aims to facilitate ... -
This report forms part of the basis for assessing the student’s performance in the course
(Master thesis, 2020)The reject water of any wastewater treatment plant (WWTP) contains carbon dioxide (CO2) and micro-organisms. The environmental biotechnology research group of the University of South-Eastern Norway (USN) is trying to ... -
Transient hydrocarbon leak calculations in offshore installations – Modelling of thermodynamics of twophase leaks.
(Master thesis, 2016)Solutions incorporating the thermodynamic behavior between gas and liquid phases can help in the model development and accurate prediction of transient hydrocarbon leaks. The system used in this report is a separator. In ... -
Tuning of viscosity and density of non-Newtonian fluids through mixing process using multimodal sensors, sensor fusion and models
(Master thesis, 2016)The main work of this thesis was to develop some empirical models that could be used to estimate the viscosity in drilling operations. The reason for this is due to the fact that oil companies spends a lot of money to make ...