Blar i Master of Science in Process Technology på forfatter "Øi, Lars Erik"
-
Density and viscosity correlations and thermodynamic properties in post-combustion CO2 capture processes
Bakhtavar, Parham (Master thesis, 2022)Physicochemical properties such as density and viscosity are critical in the design of process equipment in the post combustion amine-based CO2 capture process because they appear in the majority of the mass transfer and ... -
Investigation of the performance of a pilotscale CO2 desorption column using CFD simulations
Shakeri, Avishan (Master thesis, 2021)Technology Center Mongstad (TCM) is the world’s largest and most flexible test facility for amine based CO2 absorption and desorption. This master thesis is based on an operational problem at TCM where excess liquid loading ... -
Methane Pyrolysis
Baffuor, Priscilla (Master thesis, 2024)Methane pyrolysis is gaining attention as one of the promising technologies for mitigating climate change in the world today. Methane pyrolysis technology is a method for producing clean hydrogen with carbon as a byproduct. ... -
Process evaluation of novel CO2 capture processes for subsea application
Ommedal, Roy Sømme (Master thesis, 2021)With a subsea module for sweetening of natural gas, it is possible to extract natural gas from places with a too high concentration of CO2 is too remote or both. The separated gas containing a high amount of CO2 needs ... -
Process simulation and automated cost optimization of CO2 capture
Gholizadefalah, Mohsen (Master thesis, 2024)The growing concern over CO2 emissions has led to the development of CO2 capture technologies, with amine absorption, especially using monoethanolamine (MEA), being a widely adopted method for removing CO2 from industrial ... -
Process simulation and comparison of CO2 capture processes using carbonate and amine based solvents
Emadian, Seyedmohammad (Master thesis, 2024)Using CO2 capture to extract CO2 from large point sources (like iron-steel industries, coal-fired power plants, etc.) is a promising way to cut CO2 emissions. In general, the CO2 capture process is thought to be a remedy ... -
Process simulation and cost optimization of amine based CO2 capture integrated with a natural gas based power plant
Tahami, Henrik (Master thesis, 2024)Combining gas-fired power plants equipped with CO2 capture systems is an efficient and cost-effective method for reducing carbon dioxide emissions from flue gases, thereby mitigating greenhouse gas emissions and combating ... -
Reducing the CO2 emissions of a gas cracker by reforming fuel gas
Rustad, Emmy Kristine Lindeløff (Master thesis, 2021)With the rising need for CO2 reduction and the pressing two-degree target there is no doubt that measures must be made in the chemical process industry. Ethylene production by steam cracking is a mature and widespread ... -
Simulation and cost estimation of CO2 capture processes using different solvents/blends
Orangi, Sina (Master thesis, 2021)There has been a growing trend toward removing CO2 emissions from the industry with different methods. One of the most mature methods for carbon capture is to absorb CO2 in an amine-based (MEA) post-combustion ... -
Simulation of ammonia cracker process with Aspen HYSYS
Farokhi, Vahid (Master thesis, 2024)Ammonia is recognized as a promising marine fuel due to its potential to reduce emissions especially CO2, serving both as an energy carrier and a clean fuel. In 2018, the International Maritime Organization (IMO) set targets ... -
Utilization of excess heat from data centers.
Sharfuddin, Mohammad (Master thesis, 2020)Digitalization has influenced the rapid growth of data centers around the world. The advancement of IT and telecommunication also played a vital role in is this expansion of data centers. Data centers facilitate the ...