Blar i Process, Energy and Automation Engineering på utgivelsesdato
Viser treff 1-20 av 76
-
Adapting benchmarking to project management : an analysis of project management processes, metrics, and benchmarking process models
(Doctoral theses at NTNU;1997:93, Doctoral thesis; Peer reviewed, 1997)Since the first publication on benchmarking in 1989 by Robert C. Camp of “Benchmarking: The search for Industry Best Practices that Lead to Superior Performance”, the improvement technique benchmarking has been established ... -
Statistical estimation of loads from gas explosions
(Doctoral theses at NTNU;1998:23, Doctoral thesis; Peer reviewed, 1998)In the design of structures in the offshore and process industries, the possibility of a gas explosion must always be considered. This is usually incorporated by performing explosion simulations. However, estimations based ... -
The impact of staged combustion on the operation of a precalciner cement kiln
(Doctoral theses at NTNU;1999:89, Doctoral thesis; Peer reviewed, 1999)In this thesis, the impact of staged combustion on the operation of a precalciner cement kiln, is considered. Mathematical modelling and full-scale experiments at the Norcem cement works in Brevik, Norway, is the basis for ... -
Multivariate image regression (MIR) for quantitative predictions : prototype software implementation and selected industrial-technological pilot studies
(Doctoral theses at NTNU;2000:99, Doctoral thesis; Peer reviewed, 2000)In large and important sectors of modern production, there is an increased demand for on-line or at-line information. Both consumers and governmental regulations require that producers can document the quality of their ... -
Theoretical and Experimental Studies on Combustion of Alternative Fuels in Cement Kilns
(Doctoral thesis, 2002) -
Degradation of polymeric and particulate organic carbon in biofilms
(Doctoral theses at NTNU;2003:101, Doctoral thesis; Peer reviewed, 2003)Polymeric and particulate organic carbon (POM) are fundamental compounds in the global cycling of carbon, and constitute significant amounts of BOD in municipal wastewater. The main objective of this work is to study ... -
Roll-out of model based control with application to paper machines
(Doctoral theses at NTNU;2003:31, Doctoral thesis; Peer reviewed, 2003)A mechanistic nonlinear model of the wet end of paper machine 6 (PM6) at Norske Skog Saugbrugs, Norway has been developed, and used in an MPC application. The MPC provides reduced variability in many key variables, and ... -
Identification of signals describing pairwise interaction in plankton, bacteria and bacteriophage : a study of model, microcosm and lake
(Doctoral theses at NTNU;2003:54, Doctoral thesis; Peer reviewed, 2003)This study concerns interaction between organisms. Such interactions are often studied through organism abundances over periods of time (time-series). Time-series reflect both internal (biological) and external (environmental) ... -
Gas explosions in process pipes
(Doctoral theses at NTNU;2004:79, Doctoral thesis; Peer reviewed, 2004)In this thesis, gas explosions inside pipes are considered. Laboratory experiments and numerical simulations are the basis of the thesis. The target of the work was to study gas explosions in pipes and to develop numer- ... -
A comprehensive scaling up technique for pneumatic transport systems
(Doctoral theses at NTNU;2005:169, Doctoral thesis; Peer reviewed, 2005)The main objective of this investigation was to formulate a comprehensive scaling up technique for designing of pneumatic conveying systems by addressing the whole pipeline together with all accessories. Five different ... -
An experimental and computational study of flow behaviour in bubbling fluidized beds
(Doctoral theses at NTNU;2005:70, Doctoral thesis; Peer reviewed, 2005)Experimental and computational studies of bubble behaviour in gas/solid fluidized beds have been performed. Bubble behaviour depends on particle density, particle size and size distribution and emphasis is given to study ... -
Multivariable process control in high temperature and high pressure environment using non-intrusive multi sensor data fusion
(Doctoral theses at NTNU;2006:38, Doctoral thesis; Peer reviewed, 2006)The main objective of this thesis is to use available knowledge about a process and combine this with measurement data from the same process to extract more information about the process. The combination of knowledge and ... -
Topics in open and closed loop subspace system identification : finite data-based methods
(Doctoral theses at NTNU;2005:228, Doctoral thesis; Peer reviewed, 2006)When subspace identification methods for finite closed loop data sets are presented they are often compared to poor subspace identification methods. The methods presented in this thesis are always compared to the results ... -
Modelling of gas explosions
(Doctoral theses at NTNU;2010:221, Doctoral thesis; Peer reviewed, 2010-12-03)The content of this thesis is a study of gas explosions in complex geometries and presentation and validation of a method for simulating flame acceleration and deflagration to detonation transition. The thesis includes a ... -
Empirical modeling, state estimation, and process control with real-life applications to the Czochralski crystallization process
((Doctoral dissertations at TUC;2012:1, Doctoral thesis; Peer reviewed, 2012-05-24)This PhD thesis presents research work within the field of systems and control engineering, with emphasis on applications to real-life processes, the Czochralski (CZ) crystallization process in particular. During the PhD ... -
Removal of CO2 from exhaust gas
(Doctoral dissertations at TUC;2012:2, Doctoral thesis; Peer reviewed, 2012-05-30)Removal of CO2 from exhaust gas (CO2 capture) has become a very important topic the last years. There is international agreement to limit the emissions of greenhouse gases to reduce the global warming problem, and CO2 is ... -
An Experimental and Theoretical Study of Dense Fluidized Bed Fluid Dynamics
(Doctoral dissertations at TUC;2012:3, Doctoral thesis; Peer reviewed, 2012-05-31)The papers presented in the present study aim to elucidate the complex fluid dynamic phenomena in a cold dense phase fluidized bed reactor. Theoretical and experimental studies were conducted with this aim and several ... -
Degradation of Aqueous 2-Amino-2-methyl-1-propanol for Carbon Dioxide Capture
(Doctoral dissertations at TUC;2013:1, Doctoral thesis; Peer reviewed, 2013-01-29)Absorption-stripping with aqueous 2-amino-2-methyl-1-propanol (AMP), and especially AMP blends with other amines, such as monoethanolamine (MEA) and piperazine (PZ), presents an attractive option for carbon dioxide (CO2) ... -
Mass Transfer Kinetics of Carbon Dioxide into Concentrated Aqueous Solutions of Monoethanolamine
(Doctoral dissertations at TUC;2013:2, Doctoral thesis; Peer reviewed, 2013-02-15)Global warming arguments have gained more and more attention due to the new regulations of carbon dioxide (CO2) emission in the world. Monoethanolamine (MEA) has been employed as an important industrial absorbent for CO2 ... -
Production of polysilicon from silane pyrolysis in a fluidized bed
(Doctoral dissertations at TUC;2013:3, Doctoral thesis; Peer reviewed, 2013-06-07)The photovoltaic industry has experienced a tremendous growth over the last years. The backbone of the technology has so far been elemental silicon. Silicon is the second most abundant element on the earth, but in order ...