Blar i Master of Science in Process Technology på emneord "CFD"
Viser treff 1-4 av 4
-
Assessment of CFD methods in predicting flow regime and pressure gradient in two phase gas-liquid vertical flow
(Master thesis, 2020)Available tools for dealing with multi-phase flows are not effective with complex geometries such as process piping with combination of horizontal and vertical pipes, bends and valves. However, rapid development of ... -
Recommendation of a model for simulating & analysis of the influence of particle size distribution on the simulations of bubbling fluidized beds
(Master thesis, 2008-06-06)A computational study of the influence of particle size distribution on bubbling fluidized beds is performed. Several simulations are performed using Eulerian multiphase model for a two dimensional fluidized bed with an ... -
Simulating open channel flow for drill mud mass flow measurement, part II
(Master thesis, 2015-11-06)Advancement in oil drilling technology, particularly managed pressure drilling requires better knowledge of return drill mud flow. Since the mud outflow is in an open channel, it is proposed to use flume with constriction ... -
Simulation of flow in sedimentation tank using FLUENT
(Master thesis, 2015-10-09)Sewage treatment is the process which removes majority of the contaminants from a sewage stream and produces a liquid effluent suitable for safe disposal into the natural environment and sludge. Physical, chemical and ...