Blar i Master of Science in Process Technology på emneord "512"
Viser treff 1-6 av 6
-
CO2 for enhanced oil recovery and secure storage of CO2 in reservoirs
(Master thesis, 2015-10-30)CO2-EOR(Enhanced Oil Recovery) is an effective and useful technology that can not only increase the oil production to meet the increasing need for energy around the world, but also mitigate the negtive influence of global ... -
Duggpunktskontroll for gassinjeksjon og gasseksport ved Oseberg Feltsenter
(Master thesis, 2007)Naturgassen som tas opp fra gassfeltet Oseberg Feltsenter gjennomgår en rekke prosesser før eksport og injeksjon. En viktig prosess for å oppnå spesifikasjonskrav er gasstørking. Dette gjøres ved å bruke TEG, som er en ... -
Near well simulation and modelling of oil production from heavy oil reservoirs
(Master thesis, 2015-10-30)Heavy oil reservoirs cover up two third of the world's hydrocarbon reservoirs. Even though they are a vast energy reserve, heavy oil recovery is not considered economical due to its high viscous property. Generally horizontal ... -
Near well simulation of heavy oil reservoir with water drive
(Master thesis, 2015-10-30)The Depletion of oil production and the low recovery rate are major challenges faced in oil production at Norwegian continental self. Several studies have shown that considerable amount of oil still remains after the well ... -
Simulating open channel flow for drill mud mass flow measurement, part II
(Master thesis, 2015-11-06)Advancement in oil drilling technology, particularly managed pressure drilling requires better knowledge of return drill mud flow. Since the mud outflow is in an open channel, it is proposed to use flume with constriction ... -
Viscoelastic entrance flow of Hydrolized Polyacrylamide (HPAAM)
(Master thesis, 2015-11-12)The use of polymers in polymer/water flooding enhanced oil recovery (EOR) is a technique used since just after World War 2, and with several full scale fields in operation. Increasing oil prices and more challenging ...