Blar i Master of Science in Process Technology på tittel
Viser treff 87-106 av 147
-
Near well simulation of heavy oil reservoir with water drive
(Master thesis, 2015-10-30)The Depletion of oil production and the low recovery rate are major challenges faced in oil production at Norwegian continental self. Several studies have shown that considerable amount of oil still remains after the well ... -
Near well simulation of oil production from conventional heterogeneous oil
(Master thesis, 2015-10-30)Drilling horizontal wells has been provided to be useful for producing oil and gas. This meant increased production by maximizing the reservoir contact. However, due to heel-toe effect an uneven influx of reservoir fluid ... -
Near well simulation of oil production from heavy oil reservoirs
(Master thesis, 2015-09-18)During the last some years, there has been a lot of discussion about the challenges in the field of heavy oil production in horizontal wells. The Autonomous Inflow control Valve (AICV), which has been developed by InflowControl ... -
Near-well simulations and modelling of oil production from reservoir
(Master thesis, 2017)One of the major challenges that the oil industry faces today is water breakthrough and high production of water from mature oil fields. Early water breakthrough can occur due to high frictional pressure drop in the well ... -
Open Venturi-Channel Flow Metering Of Non- Newtonian Fluids A Case Study with Emulated Drilling Fluids.
(Master thesis, 2016)In the oil and gas industry, controlling the well pressure is a very important aspect of drilling, thus drilling fluids has been the forefront aspect in drilling operation, thereby acting as a barrier against hydrocarbon ... -
Optimization of a biomass gasification reactor
(Master thesis, 2015-09-25)Steam gasification is a well-known technology which is used to produce a high quality product gas, especially for power generation applications. The gas composition, gas quality and the purity are important for the end ... -
Optimization of gas velocity, pressure drop and column diameter in CO2 capture
(Master thesis, 2015-09-18)CO2 capture and storage (CCS) from fossil fuel fired power plants and also other large point sources is drawing increasing interest as a potential method for the control of greenhouse gas emissions. Among the different ... -
Optimization of partial CO₂ capture
(Master thesis, 2016)The cement industry accounts for about 5 % of the global anthropogenic CO₂ emissions. Traditional post-combustion CO₂ capture with monoethanolamine absorption is highly energy-intensive, which in turn leads to expensive ... -
Oxidative stability of primary amines-structure-property relationship
(Master thesis, 2015-10-09)The area of carbon capture solvent degradation with degradation mechanisms is described in this project. Analyses of degraded samples originate from a pilot plant for carbon capture studied and a theoretically chromatographic ... -
Partial CO2 capture simulation and cost estimation
(Master thesis, 2017)Simulation of CO2 absorption using amine solutions have been performed for many years at University College of Southeast Norway, both with and without vapor recompression. In this thesis, partial CO2 capture was evaluated ... -
Pelletization and Gasification of Waste Feedstock for Syngas Production
(Master thesis, 2023)Thermal degradation of wastes for energy extraction is a viable option that can substitute for green energy demand. Among the thermochemical conversion processes, the gasification of solid wastes gives better gaseous ... -
Performance evaluation of an LNG analyzer by mathematical modeling and experiments in a pilot rig
(Master thesis, 2022)Moreld Flux is in process of designing and manufacturing a sampling instrument for collecting liquified natural gas (LNG) and sending the sample for further analysis. Therefore, this project is defined to perform a literature ... -
Phase Transition in Rapid Depressurization of Liquefied Gases
(Master thesis, 2023)This thesis investigates the phase transition during rapid depressurization of liquefied gases, a crucial research field for industries like LPG storage and transportation, gas separation processes, and oil and gas production. ... -
Physical solubilities for N₂O (CO₂) in amine solution N₂O
(Master thesis, 2016)CO₂ capture has proven to be the best way to reducing a great amount of CO₂ emissions from industries, and has obtained a great deal of research work. 1-DMA-2P is one of the commercial amine absorbents with a bright future ... -
Physicochemical properties (density and viscosity) of amine solvents for post-combustion CO2 capture process
(Master thesis, 2023)Carbon capture technologies are becoming increasingly important as the negative effects of greenhouse gas emissions on the environment and human health become more evident. A key component of carbon capture processes is ... -
Process design of CO2 capture from the gas turbine at an oil platform
(Master thesis, 2022)Human activities and the ever-increasing growing need for energy, have significantly increased the concentration of carbon dioxide. Fossil fuels have established a huge impact to provoke these emissions especially in an ... -
Process evaluation of novel CO2 capture processes for subsea application
(Master thesis, 2021)With a subsea module for sweetening of natural gas, it is possible to extract natural gas from places with a too high concentration of CO2 is too remote or both. The separated gas containing a high amount of CO2 needs ... -
Process simulation of plastic waste to environmental friendly fuel
(Master thesis, 2017)The amount of plastic waste that needs to be taken care of increases every year. While much of it is recycled, a substantial amount cannot be recycled and is landfilled. This master thesis has been focused on an alternative ... -
Process Tomometric Data Fusion with Multimodal Sensor Suite in Multiphase flow studies
(Master thesis, 2016)The objective of the thesis is to propose simple tests on raw electrical measurements, using electrical capacitance tomography in order to assess the prevailing flow regime in the test section. This information regarding ... -
Pyrolysis of biomass
(Master thesis, 2021)Pyrolysis of biomass is considered to be a green technology since it has no impacts or emissions to the environment. Pyrolysis of biomass is the initial stage in the gasification process and is defined as the thermal ...