Blar i Master of Science in Process Technology på tittel
Viser treff 76-95 av 154
-
Life Cycle Assessment of a Developed Dry-type Oxyhydrogen (HHO) Generator kit. Application for the Internal Combustion Engines
(Master thesis, 2023)This study performs a life cycle assessment (LCA) on a dry-type Oxyhydrogen/hydroxyl gas (HHO ) generator kit designed explicitly for internal combustion engines. The upgraded version of the current dry-type HHO cells ... -
Life Cycle Assessment of an NPK Fertilizer Production with the Focus on Principal Harmful Substances
(Master thesis, 2023)The management of fertilizers is important to produce food, but it also has an influence on the environment since it may have negative impacts on the quality of the air, soil, and water. Heavy metals are naturally present ... -
Life Cycle Assessment of Bioelectrochemical System for Biogas Upgradation
(Master thesis, 2024)The raise in population, technology and infrastructure development is directing the present towards the future of high energy demand. The reduce the consumption of the fossil fuel, renewable energy sector should be boosted ... -
Life Cycle Assessment of Offshore Wind Farms – A Comparative Study of Floating Vs. Fixed Offshore Wind Turbines
(Master thesis, 2024)To address climate change and energy security issues associated with fossil fuels, new power generation methods such as renewable energy sources as a sustainable alternative for electricity generation are introduced. One ... -
Life cycle assessment of vermicomposting process
(Master thesis, 2024)The thorough evaluation of vermicomposting's environmental impact underscores its potential to transform agricultural methods significantly. Apart from its immediate advantages in reducing greenhouse gas emissions and ... -
Literature Review and Correlation of Density for Amines Relevant for CO2 Capture Process.
(Master thesis, 2021)This work mainly deals with study of Carbon dioxide Capture Plants and solely focuses on density of different amines and their mixtures available limitedly in literature with reference to CO2 capture plants. Different ... -
Mass Flow-rate estimation in an open venturi channel using system identification A Study of Mud flow measurements in open venturi channel
(Master thesis, 2016)Drilling operations in oil and gas industry are getting more and more advanced and complicated. One of the main reasons is that the real time monitoring and control of the processes are getting complex in their executions. ... -
Measurement and correlation of aqueous amine solution viscosities
(Master thesis, 2016)The viscosities of amines are important in designing equipment for Carbon dioxide (CO2) capture as it affects heat transfer coefficient, pressure drop in heat exchangers and piping system respectively. Reliable viscosity ... -
Measurement and correlation of data used for CO₂ absorption in different amine solutions at various temperatures
(Master thesis, 2016)In order to design CO₂ absorption-desorption columns, models of experimental data would be needed to calculate many properties of the chemical system. In this research work, the experimental density values of aqueous ... -
Minimum ignition energy of hydrogen and hydrogen-carrying fuels
(Master thesis, 2022)Hydrogen is touted to be the fuel of the future leading to low carbon emissions globally. But as this fuel is being popularized all over the world for all the industry sectors, very little is known about the combustion ... -
Model Free Optimal and Predictive Control of the K-Spice Process Simulator
(Master thesis, 2016)Impact of the slugging can significantly decrease oil production and have damage consequences for equipment. Nowadays, Model free optimal and predictive control is actual topic of discussion and could be not-exhaustive ... -
Model predictive control (MPC) with integral action; Reducing the control horizon and model free MPC
(Master thesis, 2015-09-25)Model Predictive Control (MPC) is the most widely used strategy in process industries due to remarkable features. It has the capability to control the non-minimum phase, unstable processes and handle the constraints in a ... -
Modeling and simulation of oil recovery through advanced multi-lateral wells with CO2-WAG injection
(Master thesis, 2024)The oil industry has been an important source of conventional energy. The enhanced oil recovery (EOR) method is one of the most efficient methods in the oil recovery process. Using an advanced multi-lateral well model in ... -
Modeling and simulation of post combustion CO2 capturing
(Master thesis, 2008)A dynamic model for the chemical absorption of carbon dioxide in Monoethanolamine is developed and implemented. The model includes absorption tower, de-absorption tower, reboiler, condenser and rich/lean heat exchanger. ... -
Modeling, simulation and control of the inflow basin of a wastewater treatment plant
(Master thesis, 2016)Inflow basin is an important component for wastewater treatment plant, which can equalize the hydraulic and composition variations of wastewater inflow and stabilize the performance of nutrition and toxicants removal and ... -
Near well simulation and modelling of oil production from heavy oil reservoirs
(Master thesis, 2015-10-30)Heavy oil reservoirs cover up two third of the world's hydrocarbon reservoirs. Even though they are a vast energy reserve, heavy oil recovery is not considered economical due to its high viscous property. Generally horizontal ... -
Near well simulation of heavy oil reservoir with water drive
(Master thesis, 2015-10-30)The Depletion of oil production and the low recovery rate are major challenges faced in oil production at Norwegian continental self. Several studies have shown that considerable amount of oil still remains after the well ... -
Near well simulation of oil production from conventional heterogeneous oil
(Master thesis, 2015-10-30)Drilling horizontal wells has been provided to be useful for producing oil and gas. This meant increased production by maximizing the reservoir contact. However, due to heel-toe effect an uneven influx of reservoir fluid ... -
Near well simulation of oil production from heavy oil reservoirs
(Master thesis, 2015-09-18)During the last some years, there has been a lot of discussion about the challenges in the field of heavy oil production in horizontal wells. The Autonomous Inflow control Valve (AICV), which has been developed by InflowControl ... -
Near-well simulations and modelling of oil production from reservoir
(Master thesis, 2017)One of the major challenges that the oil industry faces today is water breakthrough and high production of water from mature oil fields. Early water breakthrough can occur due to high frictional pressure drop in the well ...