Blar i Master of Science in Process Technology på tittel
Viser treff 136-144 av 144
-
Understanding influential process parameters of NPK fertilizer production; A study on prilling process in the NPK3 prilling tower (POR)
(Master thesis, 2022)A transient conduction model was implemented in Python to assess the temperature development of NPK particles, produced at Herøya, Porsgrunn. Temperatures when hitting the tower bottom was calculated to be 102.8, 67.5 and ... -
Use of Process Analytical Technology (PAT) as on-line measurement technique for pipe erosion due to particle impact
(Master thesis, 2018)Solid particle impact is getting enormous attention due to rapid progress and development in coal conversion plant, where flows of solid particles are sky-scraping at various equipments of plant. Such particles flow can ... -
Utilization of captured CO2: Enhanced esterification reactions using membrane reactor
(Master thesis, 2022)About 80% of worldwide CO2 emissions are from large stationary sources that need to be lowered to reduce the impact on the environment. One step towards this goal is to capture CO2 from post-combustion and use it as a ... -
Utilization of excess heat from data centers.
(Master thesis, 2020)Digitalization has influenced the rapid growth of data centers around the world. The advancement of IT and telecommunication also played a vital role in is this expansion of data centers. Data centers facilitate the ... -
Utilization of oxygen as partial replacement for air in cement kiln combustion processes
(Master thesis, 2021)This thesis is started with introduction, continued with model building and its simulation results, then ended with economic analysis. The idea of this study is to reduce the nitrogen content of the atmospheric air which ... -
Utilization of waste heat from cement kiln exhaust gases for regeneration of loaded CO₂ capture media
(Master thesis, 2016)Dette prosjektet var basert på noe som skjer på Norcem Brevik, hvor de er interessert i å bygge et CO2-fangstanlegg. Og så har det seg det at de har veldig varmt eksosutslipp fra sementproduksjonen. Denne varmen er Norcem, ... -
Vapor recompression in absorption and desorption process for CO2 capture
(Master thesis, 2015-09-25)Due to high emissions of CO2 and the impact it has on our environment, CO2 capture from gases is becoming more and more important. There has been performed a lot of work regarding simulation of CO2 removal at TUC However, ... -
Viscoelastic entrance flow of Hydrolized Polyacrylamide (HPAAM)
(Master thesis, 2015-11-12)The use of polymers in polymer/water flooding enhanced oil recovery (EOR) is a technique used since just after World War 2, and with several full scale fields in operation. Increasing oil prices and more challenging ... -
Waste heat availability in the raw meal department of a cement plant
(Master thesis, 2017)The main aim of this study was to find out the available heat of the exhaust gas stream that is bypassed through the raw meal department at Norcem Brevik cement plant, Norway which produces about 1 million ton of clinker ...