Blar i Master of Science in Process Technology på tittel
Viser treff 105-124 av 144
-
Recommendation of a model for simulating & analysis of the influence of particle size distribution on the simulations of bubbling fluidized beds
(Master thesis, 2008-06-06)A computational study of the influence of particle size distribution on bubbling fluidized beds is performed. Several simulations are performed using Eulerian multiphase model for a two dimensional fluidized bed with an ... -
Reducing the CO2 emissions of a gas cracker by reforming fuel gas
(Master thesis, 2021)With the rising need for CO2 reduction and the pressing two-degree target there is no doubt that measures must be made in the chemical process industry. Ethylene production by steam cracking is a mature and widespread ... -
Reduction in Sulphur Emissions from the Norcem Cement Plant in Kjøpsvik
(Master thesis, 2018)SO2 emissions in the stack gas from the Norcem cement plant in Kjøpsvik was significantly higher than the permitted emission limit in 2017. The plant aims to reduce the emissions by installing a seawater flue gas ... -
Redundans ved bruk av masse- og varmebalanser for plattformprosesser
(Master thesis, 2005)Institutt for energiteknikk (IFE) har i flere år arbeidet med bruk av balanseligninger sammen med måledata for å overvåke systemer i kjernekraftanlegg. Gjennom data reconciliation (datatilpasning) kan redundans i målingene ... -
Remote monitoring by impulse radar
(Master thesis, 2015-10-09)This master thesis is centered on development of signal processing algorithms for an Ultra - Wideband (UWB) Radar system. The goal of signal processing algorithms is to identify components of radar received signal. Moreover, ... -
Sensitivity analysis of oil production models to reservoir rock and fluid properties
(Master thesis, 2021)In this fast-growing world, the demands for energy supply are growing rapidly as well. The oil has become one of the basic needs of human beings in this era. Hence, to meet the supply of the growing world, the available ... -
Simulating open channel flow for drill mud mass flow measurement, part II
(Master thesis, 2015-11-06)Advancement in oil drilling technology, particularly managed pressure drilling requires better knowledge of return drill mud flow. Since the mud outflow is in an open channel, it is proposed to use flume with constriction ... -
Simulation and control of hydro power plants
(Master thesis, 2017)Sustainable energy development implies meeting the energy needs of the future without jeopardizing the life quality of the planet. To achieve these goals is possible by gradually replacement in energy production profile ... -
Simulation and cost estimation of CO2 capture processes using different solvents/blends
(Master thesis, 2021)There has been a growing trend toward removing CO2 emissions from the industry with different methods. One of the most mature methods for carbon capture is to absorb CO2 in an amine-based (MEA) post-combustion ... -
Simulation of flow in sedimentation tank using FLUENT
(Master thesis, 2015-10-09)Sewage treatment is the process which removes majority of the contaminants from a sewage stream and produces a liquid effluent suitable for safe disposal into the natural environment and sludge. Physical, chemical and ... -
Simulation of gas and liquid flow in a biogas reactor using Fluent.
(Master thesis, 2015-09-18)Anaerobic Digestion (AD) is a popular secondary treatment method to handle biological wastes in sewage and wastewater treatment plants due to its multiple benefits apart from the waste reduction. One of the biogas reactors ... -
Simulation of hydrogen tank refueling
(Master thesis, 2021)Several simulations of hydrogen filling process for a type IV tank were completed using openFOAM Computational Fluid Dynamics (CFD) open-source code. CFD codes have been proven to be a useful method for estimating temperature ... -
Simulation of manure resource recovery plant
(Master thesis, 2015-09-18)The Bio Win software was used to simulate manure feeding to a separator, anaerobic digester (AD) and activated sludge (AS) nitrification reactor system. The General Bio Win model called integrated AS/AD model was capable ... -
Simulation of oil production and CO₂
(Master thesis, 2016)Deep geologic injection of supercritical carbon dioxide (CO₂) for enhanced oil recovery (EOR), plays an important role in the sequestration of CO₂ to minimize the impact of CO₂-emissions due to global warming. CO₂-EOR ... -
Simulering av CO2-fjerning med aminer
(Master thesis, 2010-08-26)Gasskraftverk produserer store mengder CO2, og det er ønskelig å unngå utslipp av CO2 til atmosfæren. Skagerak Energi AS har planer om et gasskraftverk med CO2-fjerning i Grenlandsområdet. Det er utført simuleringer ... -
Software Testing, Data Security and GDPR
(Master thesis, 2019)Software and data security are an important part of a modern-day business strategy of any organization as it forms the basis for guaranteed security of information, data, and assets of any organization. This project is ... -
Spredning og antenning av hydrogen - Background Oriented Schlieren (BOS) visualisering
(Master thesis, 2007)Rapporten er delt inn i tre deler. Første del er et litteraturstudie som omhandler tidligere undersøkelser og evalueringer av ”Background Oriented Schlieren”-fotografering (BOS) og hvilke anvendelsesområder den kan ... -
Stochastic flood control using MPC of Kragerø waterways
(Master thesis, 2015-11-06) -
Study of CO₂ storage in oil reservoirs and aquifers
(Master thesis, 2017)Carbon dioxide storage in oil reservoirs and aquifers is one of the most promising research fields regarding reduction of climate gas emissions. Changing of CO₂ physical properties with temperature and pressure in deep ... -
Study on influence of geometrical features on capacity of industrial scale vertical air-lifters
(Master thesis, 2015-10-09)The main aim of this study was to investigate the influence of operating conditions and geometrical features (fluidization air flow rate QFA, transport air flow rate QTA, and nozzle position Z) on mass flow rate of solids ...