Blar i Master of Science in Process Technology på tittel
Viser treff 75-94 av 144
-
Mass Flow-rate estimation in an open venturi channel using system identification A Study of Mud flow measurements in open venturi channel
(Master thesis, 2016)Drilling operations in oil and gas industry are getting more and more advanced and complicated. One of the main reasons is that the real time monitoring and control of the processes are getting complex in their executions. ... -
Measurement and correlation of aqueous amine solution viscosities
(Master thesis, 2016)The viscosities of amines are important in designing equipment for Carbon dioxide (CO2) capture as it affects heat transfer coefficient, pressure drop in heat exchangers and piping system respectively. Reliable viscosity ... -
Measurement and correlation of data used for CO₂ absorption in different amine solutions at various temperatures
(Master thesis, 2016)In order to design CO₂ absorption-desorption columns, models of experimental data would be needed to calculate many properties of the chemical system. In this research work, the experimental density values of aqueous ... -
Minimum ignition energy of hydrogen and hydrogen-carrying fuels
(Master thesis, 2022)Hydrogen is touted to be the fuel of the future leading to low carbon emissions globally. But as this fuel is being popularized all over the world for all the industry sectors, very little is known about the combustion ... -
Model Free Optimal and Predictive Control of the K-Spice Process Simulator
(Master thesis, 2016)Impact of the slugging can significantly decrease oil production and have damage consequences for equipment. Nowadays, Model free optimal and predictive control is actual topic of discussion and could be not-exhaustive ... -
Model predictive control (MPC) with integral action; Reducing the control horizon and model free MPC
(Master thesis, 2015-09-25)Model Predictive Control (MPC) is the most widely used strategy in process industries due to remarkable features. It has the capability to control the non-minimum phase, unstable processes and handle the constraints in a ... -
Modeling and simulation of post combustion CO2 capturing
(Master thesis, 2008)A dynamic model for the chemical absorption of carbon dioxide in Monoethanolamine is developed and implemented. The model includes absorption tower, de-absorption tower, reboiler, condenser and rich/lean heat exchanger. ... -
Modeling, simulation and control of the inflow basin of a wastewater treatment plant
(Master thesis, 2016)Inflow basin is an important component for wastewater treatment plant, which can equalize the hydraulic and composition variations of wastewater inflow and stabilize the performance of nutrition and toxicants removal and ... -
Near well simulation and modelling of oil production from heavy oil reservoirs
(Master thesis, 2015-10-30)Heavy oil reservoirs cover up two third of the world's hydrocarbon reservoirs. Even though they are a vast energy reserve, heavy oil recovery is not considered economical due to its high viscous property. Generally horizontal ... -
Near well simulation of heavy oil reservoir with water drive
(Master thesis, 2015-10-30)The Depletion of oil production and the low recovery rate are major challenges faced in oil production at Norwegian continental self. Several studies have shown that considerable amount of oil still remains after the well ... -
Near well simulation of oil production from conventional heterogeneous oil
(Master thesis, 2015-10-30)Drilling horizontal wells has been provided to be useful for producing oil and gas. This meant increased production by maximizing the reservoir contact. However, due to heel-toe effect an uneven influx of reservoir fluid ... -
Near well simulation of oil production from heavy oil reservoirs
(Master thesis, 2015-09-18)During the last some years, there has been a lot of discussion about the challenges in the field of heavy oil production in horizontal wells. The Autonomous Inflow control Valve (AICV), which has been developed by InflowControl ... -
Near-well simulations and modelling of oil production from reservoir
(Master thesis, 2017)One of the major challenges that the oil industry faces today is water breakthrough and high production of water from mature oil fields. Early water breakthrough can occur due to high frictional pressure drop in the well ... -
Open Venturi-Channel Flow Metering Of Non- Newtonian Fluids A Case Study with Emulated Drilling Fluids.
(Master thesis, 2016)In the oil and gas industry, controlling the well pressure is a very important aspect of drilling, thus drilling fluids has been the forefront aspect in drilling operation, thereby acting as a barrier against hydrocarbon ... -
Optimization of a biomass gasification reactor
(Master thesis, 2015-09-25)Steam gasification is a well-known technology which is used to produce a high quality product gas, especially for power generation applications. The gas composition, gas quality and the purity are important for the end ... -
Optimization of gas velocity, pressure drop and column diameter in CO2 capture
(Master thesis, 2015-09-18)CO2 capture and storage (CCS) from fossil fuel fired power plants and also other large point sources is drawing increasing interest as a potential method for the control of greenhouse gas emissions. Among the different ... -
Optimization of partial CO₂ capture
(Master thesis, 2016)The cement industry accounts for about 5 % of the global anthropogenic CO₂ emissions. Traditional post-combustion CO₂ capture with monoethanolamine absorption is highly energy-intensive, which in turn leads to expensive ... -
Oxidative stability of primary amines-structure-property relationship
(Master thesis, 2015-10-09)The area of carbon capture solvent degradation with degradation mechanisms is described in this project. Analyses of degraded samples originate from a pilot plant for carbon capture studied and a theoretically chromatographic ... -
Partial CO2 capture simulation and cost estimation
(Master thesis, 2017)Simulation of CO2 absorption using amine solutions have been performed for many years at University College of Southeast Norway, both with and without vapor recompression. In this thesis, partial CO2 capture was evaluated ... -
Pelletization and Gasification of Waste Feedstock for Syngas Production
(Master thesis, 2023)Thermal degradation of wastes for energy extraction is a viable option that can substitute for green energy demand. Among the thermochemical conversion processes, the gasification of solid wastes gives better gaseous ...