Blar i Master of Science in Process Technology på tittel
Viser treff 56-75 av 144
-
Flame length measurements of hydrogen jets
(Master thesis, 2017)The use of hydrogen is increasing rapidly and the research on hydrogen safety must follow. The implementation of hydrogen filling stations and cars are steadily on the rise. In the case of a leakage the hydrogen will most ... -
Flame propagation in a transparent pipe with a single obstruction
(Master thesis, 2008)This report treats the problem of hydrogen explosions. The background for this thesis was based upon earlier work done by Bjerketvedt D., Vågsæther K. and Knudsen V. They investigated hydrogen explosions in a steel pipe ... -
Fluidization behavior of sand particles with a size distribution
(Master thesis, 2023)Fluidization technology has a wide range of applications in industries due to its unique ability to transport solid particles and for uniform heat transfer. But this technology is dependent on the properties of bed material. ... -
Foaming prediction in the post-combustion CO2 capture plants (amine-based) by utilizing machine learning techniques
(Master thesis, 2022)Human activities have increased the emitted greenhouse gases into the atmosphere. Among greenhouse gases, the excess of CO2 in the atmosphere has caused severe environmental issues such as global warming and ozone depletion. ... -
Full-scale NOx reduction experiments at Norcem Brevik
(Master thesis, 2015-11-06)The NOx reduction system installed at Norcem Brevik is based on the SNCR technology. It was installed in 2012 and substantial reduction of NOx has been achieved. However, it has never been performed experiments or optimizations ... -
Gas-to-gas heat exchanger for heat utilization in hot CO2 from an electrically heated calcination process
(Master thesis, 2019)Thesis was done with the objective of evaluating a gas to gas heat exchanger which will be used to recover heat from hot calciner exit gas from an electrically heated calcination process. Shell and tube heat exchanger ... -
Hydrodynamics - calculation of added mass on complex objects
(Master thesis, 2021)Added mass er et komplekst fenomen innen hydrodynamikk, hvor det finnes lite forståelse i industrien. Dermed var motivasjonen for dette arbeidet å bygge kunnskap innen hydrodynamikk og numerisk modellering av hydrodynamiske ... -
Hydrogenolysis of methyl formate over copper nano particles
(Master thesis, 2016)Hydrogenolysis of methyl formate has been proposed as a part of an alternative route for methanol production. Copper catalyst for the hydrogenation of ester to alcohol is a catalyst commonly used due to its high selectivity ... -
Improved oil recovery and the study of CO₂ storage in oil/gas reservoirs and aquifers
(Master thesis, 2016)As the world’s energy needs grow, several techniques have been introduced for an improved oil recovery (IOR) and secured storage of CO₂. Such techniques include the use of water injection, CO₂ for Enhanced Oil Recovery ... -
Improved Oil Recovery through Advanced Control
(Master thesis, 2021)Norway is one of the major suppliers of oil and gas to the world market. Revenues from sales of oil and gas have played an important role in building modern Norwegian society. Oil and gas are trapped in the subsurface ... -
Integrated operation - define and present data for analyzing and optimization
(Master thesis, 2015-09-18)This master thesis was carried out in consultation with Aker Solutions subsidiary company Aker Engineering & Technology AS (AET) at Fornebu in Oslo. The student who is accomplishing this thesis is an employed at AET, ... -
Investigation of the performance of a pilotscale CO2 desorption column using CFD simulations
(Master thesis, 2021)Technology Center Mongstad (TCM) is the world’s largest and most flexible test facility for amine based CO2 absorption and desorption. This master thesis is based on an operational problem at TCM where excess liquid loading ... -
Kinetic study on biological sulphide removal at low temperatures
(Master thesis, 2016) -
Laminar burning velocity in hydrogen-oxygen-nitrogen mixtures
(Master thesis, 2022)As today’s world is demanding a greener environment where greenhouse gas emission and global warming are much reduced, hydrogen has become the most promising element among others from periodic table. As today’s world is ... -
Li-ion battery safety
(Master thesis, 2017)The aim of this thesis was two folded: Numerically compute the combustion properties of the discharge materials from lithium-ion batteries, and experimentally measure the properties, at a test rig, by overheating lithium-ion ... -
Life Cycle Assessment of a Developed Dry-type Oxyhydrogen (HHO) Generator kit. Application for the Internal Combustion Engines
(Master thesis, 2023)This study performs a life cycle assessment (LCA) on a dry-type Oxyhydrogen/hydroxyl gas (HHO ) generator kit designed explicitly for internal combustion engines. The upgraded version of the current dry-type HHO cells ... -
Life Cycle Assessment of an NPK Fertilizer Production with the Focus on Principal Harmful Substances
(Master thesis, 2023)The management of fertilizers is important to produce food, but it also has an influence on the environment since it may have negative impacts on the quality of the air, soil, and water. Heavy metals are naturally present ... -
Life Cycle Assessment of Bioelectrochemical System for Biogas Upgradation
(Master thesis, 2024)The raise in population, technology and infrastructure development is directing the present towards the future of high energy demand. The reduce the consumption of the fossil fuel, renewable energy sector should be boosted ... -
Literature Review and Correlation of Density for Amines Relevant for CO2 Capture Process.
(Master thesis, 2021)This work mainly deals with study of Carbon dioxide Capture Plants and solely focuses on density of different amines and their mixtures available limitedly in literature with reference to CO2 capture plants. Different ... -
Mass Flow-rate estimation in an open venturi channel using system identification A Study of Mud flow measurements in open venturi channel
(Master thesis, 2016)Drilling operations in oil and gas industry are getting more and more advanced and complicated. One of the main reasons is that the real time monitoring and control of the processes are getting complex in their executions. ...