Browsing Master i teknologi by Title
Now showing items 108-127 of 171
-
Near well simulation and modelling of oil production from heavy oil reservoirs
(Master thesis, 2015-10-30)Heavy oil reservoirs cover up two third of the world's hydrocarbon reservoirs. Even though they are a vast energy reserve, heavy oil recovery is not considered economical due to its high viscous property. Generally horizontal ... -
Near well simulation of heavy oil reservoir with water drive
(Master thesis, 2015-10-30)The Depletion of oil production and the low recovery rate are major challenges faced in oil production at Norwegian continental self. Several studies have shown that considerable amount of oil still remains after the well ... -
Near well simulation of oil production from conventional heterogeneous oil
(Master thesis, 2015-10-30)Drilling horizontal wells has been provided to be useful for producing oil and gas. This meant increased production by maximizing the reservoir contact. However, due to heel-toe effect an uneven influx of reservoir fluid ... -
Near well simulation of oil production from heavy oil reservoirs
(Master thesis, 2015-09-18)During the last some years, there has been a lot of discussion about the challenges in the field of heavy oil production in horizontal wells. The Autonomous Inflow control Valve (AICV), which has been developed by InflowControl ... -
Near-well simulations and modelling of oil production from reservoir
(Master thesis, 2017)One of the major challenges that the oil industry faces today is water breakthrough and high production of water from mature oil fields. Early water breakthrough can occur due to high frictional pressure drop in the well ... -
Object Detection and Tracking on a Raspberry Pi using Background Subtraction and Convolutional Neural Networks
(Master thesis, 2018)Object detection and tracking are key features in many computer vision applications. Most state of the art models for object detection, however, are computationally complex. The goal of this project was to develop a fast ... -
Online monitoring and visualizing of a generator’s capability with Simulink
(Master thesis, 2019)The power systems today are becoming more larger, complex and are operating closer to their security and stability limits particularly due to an increase in load demands and number of environmental concerns. Voltage ... -
Open Source Hardware and Software Alternative to Industrial PLC
(Master thesis, 2016)The revolution of Internet of Things (IoT), Industrial Internet of Things (IIoT) and Industry 4.0 is approaching with new market opportunities for all kinds of smart devices. This thesis was about building such a device, ... -
Open Venturi-Channel Flow Metering Of Non- Newtonian Fluids A Case Study with Emulated Drilling Fluids.
(Master thesis, 2016)In the oil and gas industry, controlling the well pressure is a very important aspect of drilling, thus drilling fluids has been the forefront aspect in drilling operation, thereby acting as a barrier against hydrocarbon ... -
Optimal Bicycle Gear Selection Using Multi-Sensor Data Fusion The development of a prototype optimal gear selection system and integration with a commercial electronic transmission system for a fully automated gear shifting
(Master thesis, 2016)The latest technology in electronic transmission systems (ETS) and wireless sensors for bicycles bring a high potential to automate gear shifting on bicycles. An optimal gear selection system (GSS) for road bicycles with ... -
Optimization of a biomass gasification reactor
(Master thesis, 2015-09-25)Steam gasification is a well-known technology which is used to produce a high quality product gas, especially for power generation applications. The gas composition, gas quality and the purity are important for the end ... -
Optimization of biomass gasification reactor using Aspen Plus
(Master thesis, 2015-10-30)Biomass is an ideal renewable and clean energy resource. Counties all over the world are paying more and more attention to biomass because it can effectively reduce greenhouse effect due to its zero carbon dioxide emission. ... -
Optimization of design and operation of anaerobic digestion reactors
(Master thesis, 2015-11-12)The sustainable provision of bio-methane plays a key role in the future energy supply and is a promising environmentally friendly solution for waste processing. With rising number and size of biogas power plants process ... -
Optimization of gas velocity, pressure drop and column diameter in CO2 capture
(Master thesis, 2015-09-18)CO2 capture and storage (CCS) from fossil fuel fired power plants and also other large point sources is drawing increasing interest as a potential method for the control of greenhouse gas emissions. Among the different ... -
Optimization of partial CO₂ capture
(Master thesis, 2016)The cement industry accounts for about 5 % of the global anthropogenic CO₂ emissions. Traditional post-combustion CO₂ capture with monoethanolamine absorption is highly energy-intensive, which in turn leads to expensive ... -
Optimization of postable water treatment by coagulation
(Master thesis, 2016)Securing hygienic barriers and also removal of particles, natural organic matter and dissolved minerals are necessary factors in the treatment of surface water. The presence of natural organic matter has increased during ... -
Oxidative stability of primary amines-structure-property relationship
(Master thesis, 2015-10-09)The area of carbon capture solvent degradation with degradation mechanisms is described in this project. Analyses of degraded samples originate from a pilot plant for carbon capture studied and a theoretically chromatographic ... -
Parallel calibration of multiphase flow meters (MPFM) based on measurements of phase streams in separators
(Master thesis, 2019)The Alvheim field suffers from significant production deferrals of oil and gas, during calibration of multiphase flow meters used in ownership allocation. This thesis has developed an algorithm solving a new method, which ... -
Partial CO2 capture simulation and cost estimation
(Master thesis, 2017)Simulation of CO2 absorption using amine solutions have been performed for many years at University College of Southeast Norway, both with and without vapor recompression. In this thesis, partial CO2 capture was evaluated ... -
Physical solubilities for N₂O (CO₂) in amine solution N₂O
(Master thesis, 2016)CO₂ capture has proven to be the best way to reducing a great amount of CO₂ emissions from industries, and has obtained a great deal of research work. 1-DMA-2P is one of the commercial amine absorbents with a bright future ...