Master of Micro and Nano Systems Technology: Nye registreringer
Viser treff 21-40 av 57
-
Modeling of QCM for thin layer immobilization in a liquid environment
(Master thesis, 2022)In this thesis, we develop two models of a quartz crystal microbalance (QCM) to analyze the system’s behavior in liquid sensing. These models detail the device response concerning the changes in sensor geometry, surrounding ... -
Fabrication and Characterization of SnO2 Junctionless transistor
(Master thesis, 2021)The growing demand for the smallest feature size transistor introduces new challenges such as short channel effects. It becomes difficult to fabricate transistors with the increasing challenge of doping within the nano ... -
Red phosphor in Glass
(Master thesis, 2021)Massive electricity demands every year consume a lot of energy. So, consumption of energy has been a topic that is discussed widely due to alarming environmental threats like global warming. Thus, energy-saving technology ... -
Design and Fabrication of on-chip heating for Electric Substitution Radiometer
(Master thesis, 2021)This thesis describes the design, simulations, and fabrication of heating resistors by the photolithography process, and finally integration of a selected resistor through a bonding procedure to the backside of a ... -
Fabrication and Characterization of a Low-Frequency Array for a Hybrid PZT-CMUT Transducer
(Master thesis, 2021)Piezocomposite materials consist of a periodic structure of active piezoelectric materials and passive polymer materials. Piezocomposite material is widely used in medical ultrasound transducers due to the advantages of ... -
Fabrication of phantom skin for the biomedical test
(Master thesis, 2021)Implantable biomedical devices (IMDs) have an enormous prospect in the medical sector. A phantom skin model with similar properties to human skin can be fabricated to analyze if the exchange of energy between the IMD and ... -
Implantable MEMS Electrode for Neuroprosthesis
(Master thesis, 2021)In this thesis, we are microfabricating neural cuff electrodes that will be implanted in the human upper limb and will be utilized for neuroprosthesis. This is a research-based thesis that has been conducted in collaboration ... -
Characterization of Layers with Metal-Coated Polymer Spheres for use in Ultrasound Transducers
(Master thesis, 2021)The properties of materials used in ultrasound transducers affect the properties of the finished transducer, making it important to characterize the acoustic properties of these materials. The study in this thesis is ... -
Automatic Detection of e-RNA using Point Of Care Lab-On Chip and Nucleic Acid Detection/ Diagnosis device.
(Master thesis, 2020)A consortium based in Vestfold, including the University of South-Eastern Norway, Mectro AS, and Promakers AS, has worked together to develop a complete equipment for automatic e-DNA / e – RNA monitoring oceans, rivers, ... -
Optisk gyroskop konsept ved bruk av koblet resonator optisk bølgeleder: simulering og fabrikasjon
(Master thesis, 2020)Koblede koblede resonator optiske bølgeledere (CROW) har vist stort potensial som optiske gyroskoper, og oppnår følsomhet for ytelsen til navigasjonsgrad. Imidlertid er de bare overlegne over enkle ring resonatorer når ... -
Fabrication of clogging-free microfluidic chip for continuous separation of microparticles
(Master thesis, 2020)The University of South-Eastern Norway has the plan to integrate a Centre for autonomous Particle Separation, Concentration and Refining (PASECOR) inside the new USN Innovation centre. Through research and innovation, ... -
Smart-clothing Platform for Elderly Care: Monitoring of Physical Activities, Physiological Status and Outdoor Localization in Real Time
(Master thesis, 2017)The emerging research on smart clothing platform in health monitoring field has been a great concern both in academia and products industry. And with the problem of global population aging, the need for more services with ... -
Ultra-low power electronics for energy harvesting node
(Master thesis, 2015)There face challenges to build power management circuit for microscale electrostatic vibration energy harvesting. Small capacitance variation limited by standard fabrication process is a common obstacle to obtain sufficient ... -
Solid-state electrolyte for supercapacitors
(Master thesis, 2016)Renewable energy has become a primary focus for scientific community since last decade. Great interesting investigations and creative works have been carried out to develop technology for powering our society, including ... -
Speckle characteristics of laser diodes
(Master thesis, 2013)Laser, as the illumination source in the projector, has an intrinsic problem for high quality image. The speckle noise caused by laser coherence masks the details when the image projected on the screen. Therefore, to ... -
Ultrasound Transmit-Receive Electronics: Study and Upgrade
(Master thesis, 2014)The ultrasonic investigation using transmission of ultrasounds and receiving of the back-scattered echoes is a recognized measurement technology since from the decades. One of the heavy and bulky instrumentation parts in ... -
Dual frequency ultrasound transducer array
(Master thesis, 2017)Ultrasound imaging has become one of the most widely used diagnostic tools because it is safe, less expensive, produce real time image. Ultrasound technology has been widely used for a broad range of applications including ... -
Design of high Q thin film bulk acoustic wave resonator for filter applications
(Master thesis, 2014)The inevitable propagation of Lamb waves in a traditional Thin Film Bulk Acoustic Wave Resonator (FBAR) leads to the lateral leakage of energy from the active region of the device, and consequently corresponds to a degradation ... -
Photon Absorption Enhancement of TiO2 Nanotube Arrays Decorated with Aluminum Nanoparticles
(Master thesis, 2017)In this thesis, well-aligned TiO2 nanotubes (TNTs) decorated with aluminum nanoparticles have been fabricated by electrochemical anodization and subsequently magnetron sputtering technique. UV-vis spectroscopy analysis ... -
Optimal Design and Fabrication of the Polymer-based Microneedle for Improved Collection of Whole Blood
(Master thesis, 2014)The main purpose of this thesis is to develop a blood-sampling device for extracting whole blood from patient’s fingers. Polymer-based microneedles array has been chosen and developed. Despite that the concept of microneedle ...