Browsing Master of Micro and Nano Systems Technology by Title
Now showing items 12-31 of 57
-
Design and Fabrication of on-chip heating for Electric Substitution Radiometer
(Master thesis, 2021)This thesis describes the design, simulations, and fabrication of heating resistors by the photolithography process, and finally integration of a selected resistor through a bonding procedure to the backside of a ... -
Design of high Q thin film bulk acoustic wave resonator for filter applications
(Master thesis, 2014)The inevitable propagation of Lamb waves in a traditional Thin Film Bulk Acoustic Wave Resonator (FBAR) leads to the lateral leakage of energy from the active region of the device, and consequently corresponds to a degradation ... -
Development of miniaturized pH sensor based on the pH-sensitive hydrogel HEMA-co-AA
(Master thesis, 2015)The hydrogel biosensor is one of promising BIOMEMS (Biomedical Microelectromechanical system) devices with vast of applications in biomedical field. This project aims to develop a pH biosensor based on pH responsive hydrogels ... -
Diffractive lens development using 3D Gray-scale lithography of Si
(Master thesis, 2023)Diffractive lens is a valuable choice in various optical applications, as they are light in weight and compact in size making them ideal where size and weight are crucial. This characteristic allows the design for more ... -
Doping and etching processes of iCL – CNT for high energy density supercapacitors
(Master thesis, 2023)The purpose of this study is to investigate the defects resulting from the etching and N2 doping process which have the potential to increase the surface area of carbon nanotubes (CNTs), and consequently enhance the energy ... -
DRCAP : Detection, Regression, Classification, and Processing of Apple trees
(Master thesis, 2023)Yield prediction is a crucial aspect of crop management in the fruit farming industry. In recent years, a variety of methods have been increasingly utilized to address this challenge, in order to enhance the technical ... -
Dual frequency ultrasound transducer array
(Master thesis, 2017)Ultrasound imaging has become one of the most widely used diagnostic tools because it is safe, less expensive, produce real time image. Ultrasound technology has been widely used for a broad range of applications including ... -
Evaluation and simulation of LiNbO3 (Lithium Niobate) piezocomposite ultrasound transducer with center frequency of 3MHz.
(Master thesis, 2024)An ultrasound transducer is a critical and important component of any ultrasonic measurement system. Transducers convert electrical energy into acoustic energy and vice versa to transmit and receive sound waves. The ... -
Evaluation of Phosphor Materials for 4K Laser Projector
(Master thesis, 2017)Phosphor converted warm white light with high luminous efficacy and color rendering index is crucial for the future of blue diode laser driven lightning and display technologies. Particularly in projection displays where ... -
Fabrication and Characterization of SnO2 Junctionless transistor
(Master thesis, 2021)The growing demand for the smallest feature size transistor introduces new challenges such as short channel effects. It becomes difficult to fabricate transistors with the increasing challenge of doping within the nano ... -
Fabrication and Characterization of a Low-Frequency Array for a Hybrid PZT-CMUT Transducer
(Master thesis, 2021)Piezocomposite materials consist of a periodic structure of active piezoelectric materials and passive polymer materials. Piezocomposite material is widely used in medical ultrasound transducers due to the advantages of ... -
Fabrication and Properties of 1-Dimensional TiO2 and ZnO Nanocomposites Prepared by Hydrothermal Method
(Master thesis, 2016)The necessary of renewable energies as the replacement for fossil fuel such as fuel gas from CO2 or hydrogen from photoelectrochemical water splitting process are feasible by using semiconductors as photocatalysts. Among ... -
Fabrication of clogging-free microfluidic chip for continuous separation of microparticles
(Master thesis, 2020)The University of South-Eastern Norway has the plan to integrate a Centre for autonomous Particle Separation, Concentration and Refining (PASECOR) inside the new USN Innovation centre. Through research and innovation, ... -
Fabrication of phantom skin for the biomedical test
(Master thesis, 2021)Implantable biomedical devices (IMDs) have an enormous prospect in the medical sector. A phantom skin model with similar properties to human skin can be fabricated to analyze if the exchange of energy between the IMD and ... -
Feasibility of acoustically engineered backing material for ultrasound transducer : additive manufacturing of tungsten loaded thermoplastic polyurethane (TPU)
(Master thesis, 2023)The present study aims to examine the acoustic characteristics of a metamaterial made from tungsten loaded thermoplastic polyurethane (TPU) using COMSOL simulations. The investigation encompasses the simulation of single ... -
Force/deflection measurements on micromechanical structures
(Master thesis, 2007)Material properties of typical MEMS materials have been widely tested. Properties of MEMS structures also depend on other factors than the material properties. A measurement system has been made to measure force/deflection ... -
High-resolution Fourier Ptychography Microscopy using ultra-violet light and infrared light
(Master thesis, 2023)This thesis focuses on implementing the Fourier Ptychography Microscopy (FPM) technique using Ultra-violet (UV) and infrared (IR) light. In this report, the introduction provides a brief overview of FPM, its history, ... -
Implantable MEMS Electrode for Neuroprosthesis
(Master thesis, 2021)In this thesis, we are microfabricating neural cuff electrodes that will be implanted in the human upper limb and will be utilized for neuroprosthesis. This is a research-based thesis that has been conducted in collaboration ... -
Improved quality factor on lamb wave resonators using a phononic crystal structure array
(Master thesis, 2023)This thesis explores the possibility of increasing the quality factor of a lamb wave resonator device with the use of a phononic crystal structure array on the surface of the bridge suspending the device. In the growing ... -
Interconnected Crosslinked Carbon Nanotubes as Blackbody Emissive and Transmissive Films
(Master thesis, 2024)This study invistagats the applications of interconnected crosslinked carbon nanotubes (iCLCNT) films on silicon substrate to offer efficient infrared (IR) emission as black body behavior for applications such as IR sensors. ...