Experiments on power optimization for displacement-constrained operation of a vibration energy harvester
Journal article, Peer reviewed
Published version
Permanent lenke
http://hdl.handle.net/11250/2453516Utgivelsesdato
2015Metadata
Vis full innførselSamlinger
- Institutt for mikrosystemer [525]
- Publikasjoner fra CRIStin [3438]
Originalversjon
Journal of Physics, Conference Series 660 (2015) 012012 10.1088/1742-6596/660/1/012012Sammendrag
This paper presents experiments on how to approach the physical limits on power from vibration energy harvesting under displacement-constrained operation. A MEMS electrostatic vibration energy harvester with voltage-control of the system stiffness is used for this purpose. The power saturation problem, when the proof mass displacement reaches maximum amplitude for sufficient acceleration amplitude, is shifted to higher accelerations by use of load optimization and tunable electromechanical coupling k2. Measurement results show that harvested power can be made to follow the optimal velocity-damped generator also for a range of accelerations that implies displacement constraints. Comparing to the saturated power, the power increases 1.5 times with the optimal load and an electromechanical coupling k2=8.7%. This value is 2.3 times for a higher coupling k2=17.9%. The obtained system effectiveness is beyond 60% under the optimization. This work also shows a first demonstration of reaching optimal power in the intermediate acceleration-range between the two extremes of maximum efficiency and maximum power transfer.